Rugosurf 90G
Application
- Compact, versatile and powerful roughness testing gauge.
- 1000μm span in the Z axis with 3-position horizontal measurement at -90 °, 0 °, 90°.
- Ideally suited for high-precision measurements on the shop floor or in the inspection laboratory.
- Small-size, versatile roughness tester providing maximum ease of use.
- Measures up to 90 mm vertically without the need for a special support.
- 49 roughness parameters.
- Measuring range of 50 mm in the X axis.
- Interchangeable probe, with or without contact skid.
- Measures roughness parameters according to ISO 4287, 12085 (CNOMO), 13565, DIN 4776, JIS B0601:2001 and ASME B46-2002.
- Direct displaying of all measured values and computed profiles.
- Possible input of tolerances. Microprocessor-controlled based with TFT colour graphic display.
- USB digital output for data transfer to a PC running TESA Measurement Studio (this software is available as an option).
- Profile measurement up to 2 mm (optional accessory).
- Measuring Range:
- 1000 µm (39370 µin) on Z axis
- 50 mm (1.969 in) on X axis
- Display Range:
- Ra = 0 to 400 µm;
- Rt = 0 to 1000 µm
- Precision Class: In accordance with ISO 3274 Class 1
- Measuring Force: 0.75 mN (in accordance with ISO 3274)
- Resolution: 0.001 µm (0.01 µin)
- Roughness Parameters:
- DIN / ISO / JIS / ASME : Ra - Rq - Rt - Rp - Rc - Rv - RSm - Rδc - RPc - Pa - Pq -Pt - Pp - Pc - Pv - PSm - Pδc – PPc - Wa - Wq - Wt - Wz - Wp - Wv - Wc - WSm – Wδc – WPc - Rmr - Rz – Rmax - Rsk - Rku – Wz - Rk - Rpk - Rvk - Mr1 - Mr2
- DB N31007 : R3z - R3zm
- MOTIF ISO 12085 (CNOMO): Pt - R - Rx - AR - Wte - W - AW - Wx – Rke - Rpke - Rvke - Pdc - PPc - Mr1e - Mr2e
- Graphics: Profile-W, Profile-R, Profile-P, Bearing Area Curve
- Cut-off Length: 0.08 – 0.25 – 0.80 – 2.50 – 8.00 mm
- Number of Cut-off:
- 1 to 19 for a cut-off upto 2.5 mm;
- 1 to 5 for cut-off of 8.00 mm
- Diamond or Stylus Tip (R=µm; angle°): R = 5 µm, 90°
- Memory Capacity: Max. 60,000 measurements with parameters
- Probing Speed: 0.5 mm/s or 1.0 mm/s selection options
